Home > Exterior Accessories > Hitches & Towing > Hitches > Front Receiver Hitches > Curt Class 3 FRONT 2" Receiver Hitches

Curt Class 3 FRONT 2" Receiver Hitches

19 Reviews

9 Images

31545 Ford Explorer

Curt Class 3 Front Mount Receiver Hitch

Easy Installation

Front Hitch in Use

OE Look

Open Back End

Pro S Design Collar S Design Colar

Robotic Welding

Weather Tight Construction

9,000lb SLP / 500lb TW
Many Uses for Front Hitch
EVERGLOSS Powder Coat Finish
Robotic Welding
Weather Tight Construction
Pro S Design
Open Back End
Many Optional Accessories

~~$187.40$421.35~~ $126.95 32% Some Item(s) Overstocked Discount Available
William C. (New Braunfels, TX) I received the hitch in 1 day. Installation time was a little more than an hour and a half. It only took that long because I couldn't find my 1/2" drive ... full review Jeremy S. (Lebanon, VA) Good product, arrived promptly, very inconspicous on the front of the truck, no drilling or cutting required. More Product Reviews

Class 3 Front Receiver Hitch Front Hitches have a 9,000lb Straight Line Pull and up to 500 lbs Tongue Weight Rating. These 2" front mounted receiver work great for a variety of uses. Has the same uses as the rear receiver hitch. Curt hitches feature EVERGLOSS Black Powder Coated Finish which resists rust and corrosion. Precision robotic welding for superior strenght and fit. All required grade 5 hardware is included. You can use this for putting your boat into the water, towing a car, and for cargo management with a cargo carrier. Plus with the with the front hitch accessories these hitches can be used for a variety of tasks including carrying winches, bikes, spare tires and more. Available for most Pickup Trucks and Sport Utility Vehicles.

9,000lb SLP / 500lb TW:� 9,000lb Straight Line Pull and up to 500 lbs Tongue Weight Rating.�
Many Uses for Front Hitch:� You can use this for putting your boat into the water, towing a car, and for cargo management with a cargo carrier.� Plus with the with the front hitch accessories these hitches can be used for a variety of tasks including carrying winches, bikes, spare tires and more.
EVERGLOSS Powder Coat Finish: Every Curt receiver hitch receives the EverGloss powder-coat finish. Finishing curt products to a high-gloss black or color finish involves an advanced in-house powder coat process in which the powder coating is baked onto the prepared surface. Curt manufacturing adheres to a high standard in materials and application. Curt applies the optimum thickness of powder-coat film to all their finished products to ensure resistance to rusting and corrosion or abrasion.��
Robotic Welding: At Curt manufacturing, precision robotic welding ensures superior strength and fit.� All required grade 5 hardware is included.�
Weather Tight Construction: Curt MFG weather tight construction prevents rusting from the inside out by sealing the main body.
Pro S Design: This attractive and seamless one-piece collar reduces rust and ensures strength. It exceeds V-5 standards
Open Back End: All hitches are designed with an open back end. This allows for easy cleaning. Plus dirt or snow cannot get stuck inside the throat of the receivers.
Many Optional Accessories:� Curt offers a variety of option front hitch accessories, which are sold separately such as hitch step, winch mounts, spare tire mounts, skid shield and license plate frame.

Curt 2" Front Hitch Features
	Easy Installation This product offers an easy, at home no drill installation for most models. The installation instructions manual is clear cut and easy to read. For additional information, please call us toll free 7-days a week at 1-866-309-1907 or 701-253-5906.
	OE Look Front hitches install very nicely on the front on the vehicle
	Front Hitch in Use You can use this for putting your boat into the water, towing a car, and for cargo management with a cargo carrier. Plus with the with the front hitch accessories these hitches can be used for a variety of tasks including carrying winches, bikes, spare tires and more.
	Curt Class 3 Front Mount Receiver Hitch Class 3 Front Receiver Hitch Front Hitches have a 9,000lb Straight Line Pull and up to 500 lbs Tongue Weight Rating. These 2" front mounted receiver work great for a variety of uses.
	Open Back End Open Back End: All hitches are designed with an open back end. This allows for easy cleaning. Plus dirt or snow cannot get stuck inside the throat of the receivers.
	Pro S Design Collar S Design Colar Pro S Design: This attractive and seamless one-piece collar reduces rust and ensures strength. It exceeds V-5 standards.
	Robotic Welding Robotic Welding: At Curt manufacturing, precision robotic welding ensures superior strength and fit.
	Weather Tight Construction Weather Tight Construction: Curt MFG weather tight construction prevents rusting from the inside out by sealing the main body.
	EVERGLOSS Powder Coat Finish EVERGLOSS Powder Coat Finish: Every curt receiver hitch receives the EverGloss powder coat finish. Finishing curt products to a high-gloss black or color finish involves an advanced in-house powder coat process in which the powder coating is baked on to the prepared surface. Curt manufacturing adheres to a high standard in materials and application. Curt applies the optimum thickness of powder-coat film to all their finished products to ensure resistance to rusting and corrosion or abrasion
	Accessory: License Plate Holder
	Accessory: Skid Shield Optional front hitch accessories include the skid shield
	Accessory: Spare Tire Mount Optional front hitch accessories include the spare tire mount
	Accessory: Step Pad Optional front hitch accessories include the step pad
	Accessory: Winch Mount Optional front hitch accessories include the winch mount
	Accessory: Winch Mount Handles Only Optional front hitch accessories include the winch mount handles only
	Accessory: Winch Mount with Handles Optional front hitch accessories include the winch mount with handles

Curt Class 3 FRONT 2" Receiver Hitches Customer Reviews

Customer Rating	Product
	CU-31367 - Curt Class 3 Front 2" Receiver Hitch Posted By: William C. (New Braunfels, TX) on 07/2008 I received the hitch in 1 day. Installation time was a little more than an hour and a half. It only took that long because I couldn't find my 1/2" drive 14mm socket and then I couldn't find one of the 2 nuts that came with the hitch. (It was in a cup holder in my FJ Cruiser. I put it there when I drove to the auto parts store to buy a 1/2" drive 14mm socket.) If I had a pneumatic ratchet wrench I could have done the install in less than 10 minutes. (If I could have found the wrench, the socket, and didn't misplace any nuts.) :-) Very nice and well designed.
	CU-31302 - Curt Class 3 Front 2" Receiver Hitch Posted By: Jeremy S. (Lebanon, VA) on 06/2008 Good product, arrived promptly, very inconspicous on the front of the truck, no drilling or cutting required.
	CU-31408 - Curt Class 3 Front 2" Receiver Hitch Posted By: Donald D. (Seattle) on 06/2008 The product is very sturdy!
	CU-31367 - Curt Class 3 Front 2" Receiver Hitch Posted By: Michael B. (Davie) on 06/2008 the hitch did NOT "fit" with no problems. I had to forcibly pull back the passenger side of the bumper(plastic so no problem) then it went right in. looks great had the winch up front, but moved it to the back to winch out. i have not winched up front yet, but i did order a receiver drop of 10 inches and turned upside down because I think the receiver is too low. it's 14 inches off the ground with a stock 4x4.good luck and happy muddin'
	CU-31114 - Curt Class 3 Front 2" Receiver Hitch Posted By: Arne D. (Oxford, MS) on 05/2008 Solid receiver, easy to install.
	CU-31514 - Curt Class 3 Front 2" Receiver Hitch Posted By: Stanley M. (Topsham, ME) on 03/2008 Arrived 2nd day after ordering, you guys are fast! Got what I wanted. Stan
	CU-31014 - Curt Class 3 Front 2" Receiver Hitch Posted By: Eric W S. (Black Hawk, SD) on 03/2008
	CU-31221 - Curt Class 3 Front 2" Receiver Hitch Posted By: John S. (Pulaski, NY) on 03/2008
	CU-31332 - Curt Class 3 Front 2" Receiver Hitch Posted By: Dan W. (Tularosa, NM) on 03/2008 Not a hard install but it hung down below the air dam and would have caused ground clearance problems when going through ditches and situations like that. I wound up replacing the entire bumper before really using the hitch but now the hit receiver on the bumper is too tall! All in all, not a bad hitch, finish was nice as well.
	CU-31116 - Curt Class 3 Front 2" Receiver Hitch Posted By: Johnny R C. (Cookeville, TN) on 03/2008 Hitch was reecieved in great condition. Instructions were clear. I installed the hitch by myself in less than one hour. The fit was perfect! The customer service people answered all my questions before ordering. They were right on with everything they told me. The hitch is strong, built well, should last longer than the truck. Installed on a 2008 F-350 Superduty Crewcab Dually 4wd 6.4L. Love it JohnnyC
	CU-31038 - Curt Class 3 Front 2" Receiver Hitch Posted By: Andy S. (Red Wing, MN) on 03/2008 I use this hitch primarily for pushing snow with my snow sport plow. Works well and held up good through the winter. Mounts through the existing holes on the factory tow hooks. If you have the FX4 package you will have to remove the skid plate for the transfer case. It can then be reinstalled once the hitch is up in place.
	CU-31108 - Curt Class 3 Front 2" Receiver Hitch Posted By: Paul B. (Tiverton, RI) on 03/2008 I would recommend this product to all it was not a problem to place it on my truck All the hardware you need was in the package. Thanks again
	CU-31320 - Curt Class 3 Front 2" Receiver Hitch Posted By: William R H. (New Freedom, PA) on 03/2008 Great Product, fast shipping, and very easy to install, RealTruck staff are awesome, very helpful. Thanks
	CU-31408 - Curt Class 3 Front 2" Receiver Hitch Posted By: Brian M. (Blue Springs, MO) on 03/2008 Hitch was a quality piece, however I was looking for a hitch for my Snowsport snow plow. This hitch has the 2" receiver ABOVE the bumper, good for winch or the likes, but not the snow plow.
	CU-31109 - Curt Class 3 Front 2" Receiver Hitch Posted By: Thomas A H. (Martin, TN) on 03/2008 Perfit fit, quality product
	CU-31322 - Curt Class 3 Front 2" Receiver Hitch Posted By: Ron B. (Kingston, ON) on 03/2008 Very nice hitch.....install was easy...
	CU-31198 - Curt Class 3 Front 2" Receiver Hitch Posted By: Art C. (Murray, KY) on 03/2008 well built, built to accomodate existing accessories. no drill, perfect fit, and built to last. well satisfied.
	CU-31241 - Curt Class 3 Front 2" Receiver Hitch Posted By: thomas M. (Bear, DE) on 03/2008
	CU-31320 - Curt Class 3 Front 2" Receiver Hitch Posted By: Michael C. (Queen Creek, AZ) on 03/2008 fit perfectly, as expected

To find products for your vehicle, select your Make, Model, and Year.

Manufacturer Information

Curt makes sure that every car, SUV, and truck will look good when its towing and when it's not. Curt offers the exclusive evergloss finish in a wide variety of colors for its receiver hitches, ball mounts, tube covers, trailer ball covers and bike racks. Curt invests extra effort and expense into making sure their products look as great as they perform. Curt Manufacturing ensures that strength and performance are optimized at every level from design to finish. Curt makes sure their products have the capacity, the strength, and the endurance to do the job right.
View all Curt MFG products

Manufacturer Documents