Maxloader Overload Suspension Spring Support Systems |
 |
|
|
Shipping Notes: Ships Oversize Order Notes: When ordering, please specify in the order notes whether your vehicle has factory suspension or if any lift or other suspension modifications have been made.If you would like a set of Maxloader Spring Supports for a vehicle that is not listed, please call us at 877 216 5446. For an additional $50 a set of springs can be custom built for just about any vehicle. Maxloader also offers a wide selection of applications that fit RVs. Please contact one of our sales associates for details. |
The engineers at Maxloader believe that the customer does not have the time nor the money to invest in a spring system that will eventually fail. To overcome this, the Maxloader Spring Support System was introduced as being both cost effective and safe for the user. The Maxloader System is easy to install, safe for all operations, and will never wear out. The Maxloader installs between the axle and your factory leaf springs. Unlike other systems that mount above the leaf spring and always work against the factory springs, the Maxloader Spring Supports only provide additional support when the factory springs are loaded. This allows for a plush, factory ride during daily commutes, while providing increased support and stability when hauling and/or towing heavy loads. The below the spring mount is designed to only engage when needed and eliminates any pre-tensioning allowing for a factory ride empty or full. The Maxloader springs are as long as your factory leaf springs, providing support to the factory leafs at three key points; both spring ends and in the center mounting location. This ensures an evenly distributed load and prevents fatiguing stress that other systems exhibit and eventually cause broken leaf springs. This unique design is also very effective at eliminating swaying and rolling characteristics, especially in corners. Installation is easy and and can be quickly accomplished with only a few bolts; no clamps, drilling, or air system components. The end result of a Maxloader Spring Support System is a vehicle that rides smoother and more level, with evenly distributed weight resulting in less strain to the drivetrain and suspension components. All Maxloader Systems are backed by a Lifetime Warranty.
- Additional Support: The Maxloader Spring Support Systems provides additional spring support to your truck or SUV. The Maxloader was designed to assist the factory leaf springs when they compress down onto the helper springs, eliminating pre-tensioning and a constantly stiff ride.
- Better Handling/ Control: The Maxloader's design allows for better handling and control while carrying heavy loads. This spring system was designed to provide factory handling and control regardless of what size load your vehicle is carrying. (Always stay within your vehicle's rated GVW load limits.)
- Less Sway: The full length design of the Maxloader System allows it to act like an anti-sway bar. It helps prevent rolling and swaying characteristics that often occur when a vehicle becomes too overloaded for the factory suspension.
- Less Maintenance: The Maxloader Systems require less maintenance than any other spring support system out there. There are no additional clamps, bushings, or air lines to worry about. The Maxloader also helps reduce stress and wear on your vehicles drivetrain and suspension components.
- No Adjustments: The Maxloader Spring System never requires tuning or adjustments. Once the spring system is installed and securely fastened, users will find there is virtually nothing to adjust or wear out.
- Level Loads: Maintain a factory ride height and level loads with a Maxloader System. The rear of the vehicle will sit level, eliminating front end lift and un-natural steering tendencies.
- Factory Ride: The Maxloader Springs allow your vehicle to maintain a factory ride. While empty, only the factory springs will be working, ensuring a plush and comfortable ride. When the vehicle is loaded, the Maxloader springs begin to interact with the factory springs to provide additional support and level suspension travel.
- Easy Installation: The Maxloader easily installs between your factory leaf springs and axle. It works with your factory spring pad pins and mounting brackets with no additional modifications or drilling. Simply install the longer U-bolts and you have a factory looking suspension with factory ride characteristics.
- Lifetime Warranty: All Maxloader Spring Supports are backed by a LIFETIME WARRANTY. There are no wearing parts and the polyurethane bushings provide long life, less noise, and better shock load dampening.
| Maxloader Heavy Duty Spring Supports | |
 |
Chevy- Before Maxloader System Before the Maxloader System was installed, this Chevy Silverado suffered from overloaded rear leaf springs. The rear suspension sags and suffers from swaying and body roll during lane changes and turns. With an overloaded rear suspension the front axle becomes light and can lead to unpredictable steering characteristics. |
 |
Chevy- After Maxloader System After the Maxloader System was installed in this Chevy Silverado the factory ride height was recovered. Maintaining this ride height ensures proper handling characteristics putting less strain and stress on suspension and drivetrain components. |
 |
Dually Unloaded- Independent When the truck is empty, the Maxloader springs are completely independent of the factory leaf springs. This allows for a much softer spring rate resulting in a plush, factory ride. The bottom mount design eliminates pre-loading the suspension when the additional support is not needed. Users will find with the Maxloader System that daily commutes are much more comfortable than competitors spring systems. |
 |
Dually Loaded- On Maxloader Springs When loaded, the factory leaf springs begin to collapse on the Maxloader springs. The Maxloader springs provide additional support to help stabilize the load and provide a safe and steady ride height. The Maxloader system's progressive spring rate design also acts as an anti-sway bar to prevent sway and body roll that is often common when towing or hauling large objects. |
 |
Dually- Empty Before this dually truck is loaded, the factory leaf springs are independent of the Maxloader System and the vehicle maintains a factory ride. |
 |
Dually With 4000 lbs Cargo This Maxloader equipped truck was loaded with 4,000 lbs of cargo in the bed. Notice how it maintains a factory ride height that allows for safter transportation as well as additional suspension travel to prevent damaging cargo versus stock vehicles that are bottomed out on the factory springs. |
 |
Alignment Bracket The Spring Alignment Bracket ensures all the leaf springs stay in alignment. The bracket is tall enough to also fit over the factory leaf springs ensuring the Maxloader System is always in alignment with the factory spring pack. |
 |
Hole For Factory Spring Pin The Maxloader Spring Support Systems come with pre-drilled holes for your factory spring pin. This ensures proper positioning and alignment of the Maxloader springs with the factory leafs. |
 |
Maxloader Spring Pad Pin The Spring Pad Pin on the Maxloader System allows for proper fitment of the Maxloader springs with the factory leaf springs. The pin keeps the spring systems aligned and in place during suspension travel. |
 |
Polyurethane Pads These heavy duty polyurethane pads are constructed of a very durable material to ensure long life. These pads also reduce noise and dampen the shock load when the factory leafs contact the Maxloader springs. |
 View available Part Numbers for this Product Line |
