Putco Fender Trim - Chrome Stainless Steel |
![]() |
- OEM Chrome Finish: Great look of chrome with stainless steel side fender trim by Putco.
- Full or Half Trim Available: Available in 4 Piece Full Sets (fits the entire wheel well) or 4 Piece Half Sets (fits top half of fender).
- Stainless Steel Construction: Putco uses only high quality stainless steel and then adds a chrome finish to complete the look.
- Vehicle Specific Design: Sets are specifically made to fit your vehicle's make and model.
- Mounting Hardware Included: Each set of 4 fender trim moldings come boxed with rubber seal guards, hardware, and installation instructions.
- Limited Lifetime Warranty: Backed by Putco's limited lifetime warranty.
| Stainless Steel Fender Trim | |
![]() |
4 Piece Half Sets & Full Sets These units are available in Full Sets (fits the entire wheel well) or Half Sets (fits top half of fender). They have the NeveRust lifetime warranty and look great with other chrome trim. This fender trim is vehicle specific and is backed by Putco's warranty. Each set of 4 fender trim moldings come boxed with rubber seal guards, hardware, and installation instructions. Sets are specifically made to fit your vehicle's make and model. |
![]() |
4 Piece Full Set Chev Silverado Full Sets (fits the entire wheel well). They have the NeveRust lifetime warranty and look great with other chrome trim. This fender trim is vehicle specific and is backed by Putco's warranty. Each set of 4 fender trim moldings come boxed with rubber seal guards, hardware, and installation |
![]() |
4 Piece Half Set Dodge Ram Half Sets (fits top half of fender). They have the NeveRust lifetime warranty and look great with other chrome trim. This fender trim is vehicle specific and is backed by Putco's warranty. Each set of 4 fender trim moldings come boxed with rubber seal guards, hardware, and installation |
Putco Fender Trim - Chrome Stainless Steel Customer Reviews
| Customer Rating | Product |
|---|---|
|
PT-97301 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Thomas B. (Trenton, MO) on 10/2008 Everything was great other than I was short 5 clips that would have allowed me to do a total no-drill install
|
|
|
PT-97105 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Nate K. (West Fargo, ND) on 10/2008 I had a great experience dealing with real truck. they get the product to me very fast and its always in good order. the fender flares fit very well and took me less than one hour to put on my truck. Im very happy with both real truck and the products that i have purchased from them for this truck and my last one. Thanks again!
|
|
|
PT-97302 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Clyde E R. (Westfield, PA) on 10/2008
|
|
|
PT-97301 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Donald S. (Twp Washingtn, NJ) on 10/2008 Looks Great Easy to put on and best of all I got it fast.
|
|
|
PT-97220 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Hank M. (Woodland Hills, CA) on 09/2008 The flares fit fine. They seem larger in real life than in the pictures. There are multiple mounting options, and the pull-through tabs will hold the trim in until you can drill holes if that is your preference. (I recommend it.) I would buy these again, as the truck looks pretty plain without them, and they provide a little protection from door dings.
|
|
|
PT-97290 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Edwin B. (Boaz) on 09/2008 Did not fit well. Was time consuming to install.
|
|
|
PT-97289 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Patrick C. (Rochester, NY) on 09/2008 The fender trim came packaged in individual plastic sleaves and was in good condition. The product itself pretty much met my expectations. After the installation, it looks really great on the 2008 Chevy 1500 Silverado. The installation took me about 3 1/2 hours. I had to remove each wheel in order to get enough room to drill the holes for attaching the trim with the drill that I have. (I also installed the splash guards at this time also. Another reason to remove the wheels.) In the front wheel wells, there are three hex head screws that hold up the inner lining and prevent the trim from lying in place snugly. These are in the way of installing the trim directly. I opted to cut out areas of the trim piece so that the trim went around the screw heads. The rear trim pieces went in without any problems at all. I would recommend the trim as it definitely adds a little bling for eye appeal. Just be ready to spend a few extra minutes on installation on the 2008 Silverado.
|
|
|
PT-97289 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Pamela C. (West Memphis, AR) on 08/2008
|
|
|
PT-97289 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Ralph W. (Roy, WA) on 07/2008 Item ordered was exactly what I wanted. Item sent quickly and even fit perfect.
|
|
|
PT-97104 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Kevin M. (Salina, KS) on 07/2008 Easy to install and looks good on the truck.
|
|
|
PT-97289 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Richard D. (Snoqualmie, WA) on 05/2008 Seems to be a quality product but the portion of the trim that extends into the fender well could be slightly longer so that it extends further under the fender well liner instead of landing part way on and part way off of it. As far as my purchasing experience, it was great, the product arrived very quickly and well wrapped to prevent damage.
|
|
|
PT-97290 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Robert J. (Lincoln, NE) on 05/2008 Installed easy and look great.
|
|
|
PT-97105 - Putco Fender Trim - Chrome Stainless Steel
Posted By: William J. (Goose Creek, SC) on 04/2008 Looks great and it was easy two install. Two different ways to install makes it easier. I found it easier to use both ways because one way kinda holds it in place while you screw it in for a more secure hold.
|
|
|
PT-97219 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Steve S. (Mankato, MN) on 04/2008 Packaging could be improved; box subject to crushing.
|
|
|
PT-97102 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Eric S. (Black Hawk, SD) on 03/2008
|
|
|
PT-97290 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Ronald A J. (Cedar Park, TX) on 03/2008 Fender trim fit for the front wheel wells I'd give a 2!
The back trim was a 4! |
|
|
PT-97104 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Phylis S. (Madison, NE) on 03/2008 bed rails were great. the fender trim was a bear to install.
|
|
|
PT-97108 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Raymond W. (Louisville, KY) on 03/2008 Adding the fender trim to my truck gave the truck the fullnest I was looking for.Everyone noticed the change and loved it.
|
|
|
PT-97289 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Joe D. (Livermore, CA) on 03/2008 RealTruck has the best service and the best price, an unusual combination (normally you choose between one or the other) Delivery was lightning-fast.
The Putco fender trim was well packaged, well documented and easy to install: It looks great on a '08 Silverado LTZ that was vanilla-pudding plain before. The only objection (I'm nitpicking here) is that the inner arch of the trim was corrugated when its was made: Bending stainless to a given shape will do that. I'm not sure if a different fabrication process may result in a smooth surface inside the fender. Perhaps costs dictate this approach. But unless you're picky and scrutinice the trim closely you'd hardly notice. |
|
|
PT-97217 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Buzzy B. (Greensboro, NC) on 03/2008 adds good looks to truck and very easy to put on the fenders about 1/2 hour
|
|
|
PT-97104 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Gerald C. (Gaylord, MI) on 03/2008
|
|
|
PT-97202 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Larrt T. (Austin, TX) on 03/2008 The chrome trim dressed up the appearance of my ford so much that I sold it when offered a great price. Thanks Larry Todd, Austin |
|
|
PT-97105 - Putco Fender Trim - Chrome Stainless Steel
Posted By: Joshua L. (Creve Coeur, IL) on 03/2008 Was fairly easy to install. Truck looks more trick.
|
|
View all Putco MFG products
View available Part Numbers for this Product Line |
















