Home > Exterior Accessories > Tonneau Covers & Tops > Truck Bed Covers - Hard > Retracting Truck Bed Covers > Roll-Top-Cover Hard Retracting Truck Bed Covers
Roll-Top-Cover Hard Retracting Truck Bed Covers |
 |
|
|
||||||
The Original Roll Top Cover is a retractable hard tonneau truck bed covers from Pace Edwards. The Roll-Top-Cover is made of a padded polymer cover laminated to rigid aluminum panels. This truck bed tonneau cover keeps your gear Safe and Secure. The Roll Top Tonneau Cover opens and closes easily. Just unlock it to open. Push the cover towards the canister and it retracts up to the front of the bed so you have access to your stuff. It also accommodates the hauling of large items. The Roll Top Cover lock secures the cover at the tailgate. The tailgate operates independently of the cover. This affordably-priced hard retracting cover has a Low Profile Design. This aerodynamic design increases fuel economy up to 11%. The RollTop Cover hard tonneau cover is very user friendly and allows all around use.
- Original Hard Retracting Cover: The Roll Top Cover® is the original retractable hard tonneau truck cover from Pace-Edwards since 1985!
- Opens in seconds: The Roll-Top-Cover hard tonneau retracts out of the way into canister at the front of the truck bed leaving plenty of room to haul large cargo when you need to. The roll top bed cover is very user friendly. Opens in seconds when you need truck bed access.
- Vinyl over Aluminum: Weather-resistant padded vinyl polymer laminated to rigid aluminum panels that glide smoothly along black powder-coated side rails. Rolltop Cover has Superior scratch resistant finish on aluminum trim.
- Safe and Secure: The Roll Top Tonneau Cover opens and closes easily. Just unlock it to open. The Roll Top Cover lock secures the cover at the tailgate. The tailgate operates independently of the cover.
- Heavy-Duty Spring: Helps the tonneau cover retract smoothly and easily
- Keyed Lock: The Roll Top Cover has a key lock. The key is what locks hard retracting tonneau cover securely at the tailgate. (note: a tailgate lock is sold separately to lock the tailgate)
- Optional Clamp Install Kit: Comes standard as a Drill Installation. Allow about 60 minutes. Add an extra 30 minutes if you have an over the rail bedliner. An Optional Clamp Kit is available for some models at an additional charge. You can also get an optional pull strap and an optional handle insulator.
- Increase Full Economy 11%: Low-profile, aerodynamic design increases fuel economy up to 11%.
- 3 Year Pace-Edwards Warranty: Made by Pace Edwards makers of the JackRabbit and Bedlocker manual and electric retractable hard tonneau covers. Backed by Pace Edwards full 3-year warranty
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
| RollTop Cover Features | |
 |
Better Aerodynamics Low-profile, aerodynamic design increases fuel economy up to 11% |
 |
Gas Mileage Savings Low-profile, aerodynamic design increases fuel economy up to 11% |
 |
Heavy-Duty Spring Heavy-duty spring helps the tonneau cover retract smoothly and easily |
 |
Key Locks Cover The Roll-Top Cover has a key lock. The key is what locks hard retracting tonneau cover securely at the tailgate. (note: a tailgate lock is sold separately to lock the tailgate) |
 |
Optional Clamp Kit The Roll-Top Cover comes as a drill on installation. However, an optional clamp kit is available for most models. |
 |
Optional Pull Strap An optional pull strap is available. This is not needed to open or close the cover, but it does come in handy. |
 |
Pace Edwards Warranty Pace Edwards Company prides itself in fast, friendly warranty service for all of our products. Our goal is to design quality into everything we make. We warrant our products to be free from defects in material and workmanship under normal use for one year from the date of purchase. |
 |
Vinyl over Rigid Aluminum Panels Weather-resistant padded vinyl polymer laminated to rigid aluminum panels that glide smoothly along black powder-coated side rails |
How does the Roll-Top-Cover work? The Roll-Top-Cover slides along rails mounted to the sides of the truck bed into a canister at the front of the truck bed. The Roll-Top blanket rolls around a reel inside the canister with the help of a coil spring which maintains tension on the cover at all times making it easy to open. The canister measures 9.75” wide by 9” high.
What is the Roll-Top-Cover made of? The Roll-Top-Cover blanket consists of interlocking aluminum panels bonded to a polymer composite material. This special blend of textured polymer material will provide a long life while maintaining flexibility at sub-freezing temperatures.
Will the cover keep the truck bed dry? What about ice and snow? The Roll-Top-Cover is designed so that water collected on the top is carried to the canister. Drain tubes located at the base of the canister then take the water outside the truck, to help keep your truck bed dry. Water cannot pass through the one-piece polymer top, however water may intrude into the bed via components that are not part of the Roll-Top-Cover such as the tailgate, stake pockets, etc. These components require proper sealing during installation. We do not claim that our covers are 100% waterproof, and have never heard this claim regarding a competing cover. Be very cautious if a manufacturer says that their retractable cover is 100% waterproof. Snow should be swept off of the cover with a broom before operating the cover otherwise you will end up with the snow in the truck bed. Ice can be removed by taking your hand and smacking the cover as close to the middle as possible this will cause a vibration in the cover that breaks up the ice making it easy to remove. Do not use anything but your hand for this.
Is the cover hard to install? How long will installation take? Installation is easy. All parts are an exact match to your truck – no cutting necessary! A few small holes drilled on the inside of the truck bed sill are all that is needed for installation. Optional Clamp kits are available for most application if you do not want to drill holes in your truck bed. Tools needed for most applications will be a drill (we even provide the drill bit), a medium-sized Phillips screwdriver and a medium-sized slotted screwdriver. Installation should take under 1 hour for the professional and 1-2 hours for a first time installer. See the installation tab for more information
How does the Roll-Top-Cover lock? The Roll-Top-Cover locks with a key in the center of the cover near the tailgate. The key turns arms that lock into the side rails mounted on the sides of the truck bed. Besides the lock position at the tailgate, there is also a second lock position 20 inches forward of the tailgate (for loading small items) and at 60 inches on all full-size long bed trucks for use with 5th wheel applications. Pace Edwards can add an additional locking position to fit your specifications for a small upcharge. This may add five days to the shipping date.
Will the cover improve my gas mileage? How? Your gas mileage should improve between 7% and 10% on the highway, with the cover closed on the bed (except when towing). A university study shows substantial gas mileage improvement whenever the box of a pickup is covered. Below is a PDF of the press release information on gas mileage savings. Input from customers and our own experience bear out the accuracy of this claim.
Will the cover work with my bedliner? The rails on our cover are designed to fasten directly on the sill of the truck bed. If you have a bedliner that covers the sill, modification will be required. Most under-the-rail bedliners are more easily fitted with our cover, but may also require modification near the front corners. See Bedliner modification sheet below. Please call our Technical Support Reps for information regarding fit with your bedliner.
Is there a warranty on the Roll-Top-Cover? Yes, there is a three-year factory defect warranty on all parts. See warranty statement below.
Roll-Top-Cover® Care and Maintenance: To assure quiet, smooth operation, apply a small amount of grease to the wear strips where the metal end of the panels and the wear strips meet. This initial application should be sufficient for a year or more. Regrease the wear strips if the cover begins squeaking during use. It is important to open and close the cover regularly; the spring that operates the cover is self-lubricated and regular use assures that it stays in proper working condition. After installation, if the cover is tight or hard to open and close, the shimming may need to be redone. Over a period of time, if the cover becomes difficult to move in or out (particularly on hot days), check that the side-to-side clearance on the Roll-Top-Cover is set at 1/8” or more on both sides. Drain tubes may become clogged over time and should be removed and cleaned. Periodically remove the top cover and clean out the canister. To help keep the Roll-Top-Cover retractable tonneau cover looking its best, we recommend washing it the same as caring for your truck finish. However you should not wax your cover. Using a citrus based vinyl cleaner and protectant such as Pace Edwards Brand or the 303 brand will keep your cover looking like new. Alcohol, petroleum based or silicon-based cleaners such as Armor-All should be avoided and ARE NOT recommended for our covers.
Roll-Top-Cover ® Technical Support: If you have any questions please call our Technical Support at 877-216-5446Associated Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
What is the Roll-Top-Cover made of? The Roll-Top-Cover blanket consists of interlocking aluminum panels bonded to a polymer composite material. This special blend of textured polymer material will provide a long life while maintaining flexibility at sub-freezing temperatures.
Will the cover keep the truck bed dry? What about ice and snow? The Roll-Top-Cover is designed so that water collected on the top is carried to the canister. Drain tubes located at the base of the canister then take the water outside the truck, to help keep your truck bed dry. Water cannot pass through the one-piece polymer top, however water may intrude into the bed via components that are not part of the Roll-Top-Cover such as the tailgate, stake pockets, etc. These components require proper sealing during installation. We do not claim that our covers are 100% waterproof, and have never heard this claim regarding a competing cover. Be very cautious if a manufacturer says that their retractable cover is 100% waterproof. Snow should be swept off of the cover with a broom before operating the cover otherwise you will end up with the snow in the truck bed. Ice can be removed by taking your hand and smacking the cover as close to the middle as possible this will cause a vibration in the cover that breaks up the ice making it easy to remove. Do not use anything but your hand for this.
Is the cover hard to install? How long will installation take? Installation is easy. All parts are an exact match to your truck – no cutting necessary! A few small holes drilled on the inside of the truck bed sill are all that is needed for installation. Optional Clamp kits are available for most application if you do not want to drill holes in your truck bed. Tools needed for most applications will be a drill (we even provide the drill bit), a medium-sized Phillips screwdriver and a medium-sized slotted screwdriver. Installation should take under 1 hour for the professional and 1-2 hours for a first time installer. See the installation tab for more information
How does the Roll-Top-Cover lock? The Roll-Top-Cover locks with a key in the center of the cover near the tailgate. The key turns arms that lock into the side rails mounted on the sides of the truck bed. Besides the lock position at the tailgate, there is also a second lock position 20 inches forward of the tailgate (for loading small items) and at 60 inches on all full-size long bed trucks for use with 5th wheel applications. Pace Edwards can add an additional locking position to fit your specifications for a small upcharge. This may add five days to the shipping date.
Will the cover improve my gas mileage? How? Your gas mileage should improve between 7% and 10% on the highway, with the cover closed on the bed (except when towing). A university study shows substantial gas mileage improvement whenever the box of a pickup is covered. Below is a PDF of the press release information on gas mileage savings. Input from customers and our own experience bear out the accuracy of this claim.
Will the cover work with my bedliner? The rails on our cover are designed to fasten directly on the sill of the truck bed. If you have a bedliner that covers the sill, modification will be required. Most under-the-rail bedliners are more easily fitted with our cover, but may also require modification near the front corners. See Bedliner modification sheet below. Please call our Technical Support Reps for information regarding fit with your bedliner.
Is there a warranty on the Roll-Top-Cover? Yes, there is a three-year factory defect warranty on all parts. See warranty statement below.
Roll-Top-Cover® Care and Maintenance: To assure quiet, smooth operation, apply a small amount of grease to the wear strips where the metal end of the panels and the wear strips meet. This initial application should be sufficient for a year or more. Regrease the wear strips if the cover begins squeaking during use. It is important to open and close the cover regularly; the spring that operates the cover is self-lubricated and regular use assures that it stays in proper working condition. After installation, if the cover is tight or hard to open and close, the shimming may need to be redone. Over a period of time, if the cover becomes difficult to move in or out (particularly on hot days), check that the side-to-side clearance on the Roll-Top-Cover is set at 1/8” or more on both sides. Drain tubes may become clogged over time and should be removed and cleaned. Periodically remove the top cover and clean out the canister. To help keep the Roll-Top-Cover retractable tonneau cover looking its best, we recommend washing it the same as caring for your truck finish. However you should not wax your cover. Using a citrus based vinyl cleaner and protectant such as Pace Edwards Brand or the 303 brand will keep your cover looking like new. Alcohol, petroleum based or silicon-based cleaners such as Armor-All should be avoided and ARE NOT recommended for our covers.
Roll-Top-Cover ® Technical Support: If you have any questions please call our Technical Support at 877-216-5446Associated Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
By having a Pace-Edwards Cover on your truck, the average increase in fuel economy is 11%. Below are covers made by Pace-Edwards, the originators of the hard retracting truck bed cover. For additional information, please call 7-days a week 1-877-216-5446 or 701-253-5906 or email cs@realtruck.com
*Optional equipment. See application guide.Associated Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
| --Roll Top Cover-- | --JackRabbit-- | --BedLocker-- | ||
| Exposed aluminum slat blanket | No | No | Yes | |
| Padded polymer blanket | Yes | Yes | No | |
| Electric w/ remote control | No | No | Yes | |
| Electromagnetic brake | No | No | Yes | |
| Cargo light | No | Yes* | Yes | |
| Multiple latching/locking positions | Yes | Yes | Yes | |
| Independent latch & lock mechanism | No | Yes | N/A | |
| Lock Cover | Yes | Yes | Yes | |
| Pull strap | Yes* | Yes | N/A | |
| No-drill installation | Yes* | Yes | Yes | |
| Self-leveling clamps | Yes* | Yes | Yes | |
| Low profile, aerodynamic design | No | Yes | Yes | |
| Textured powder-coat finish | No | Yes | Yes | |
| Smooth powder-coat finish | Yes | No | No | |
| Installation time | 1hr | 1hr | 1hr | |
| (approximate average) | ||||
| UPS shippable | Yes | Yes | Yes | |
| Warranty | 1yr | 1yr | 1yr | |
| Number of available applications | 80 | 59 | 60 | |
| Number of available SKUs | 33 | 28 | 28 |
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
 |
Roll Top Cover In Action Truck bed access, the Roll-Top-Cover hard tonneau retracts out of the way into canister at the front of the truck bed leaving plenty of room to haul large cargo when you need to. |
 |
Drawing of Roll Top Cover Weather-resistant padded vinyl polymer laminated to rigid aluminum panels that glide smoothly along black powder-coated side rails. Heavy-duty spring helps the tonneau cover retract smoothly and easily. |
|
Optional Clamp Kit The Roll-Top Cover comes as a drill on installation. However, an optional clamp kit is available for most models. |
Roll-Top-Cover Hard Retracting Truck Bed Covers Customer Reviews
Manufacturer Information View all Pace Edwards products Manufacturer Documents Note: Adobe Reader is required to view PDF documents: Download Adobe Reader View available Products for this Product Line |
